Henderson ICE CONTROL FSM AUGER, Manual

Page: 1 / 52

08/22/18
ICE CONTROL SPREADER
MODEL: FSM AUGER
SERIAL #:
MANUAL # 134376
INSTRUCTIONS FOR ORDERING PARTS
Order parts from the authorized dealer covering your area.
DEALER:
Phone #:
ALWAYS GIVE THE MODEL AND SERIAL NUMBER.
To obtain parts promptly, give part name and part number.
Give post office address, town, and state where the parts are to be shipped. UPS (United
Parcel Service) and other carriers will not ship to a post office box. You must use a street
address. Also be sure to specify whether material is to be shipped by freight, express, parcel
post, or UPS. All UPS shipments will be normal surface routing unless specified otherwise.
Confirm all telephone or FAX orders in writing.
Credit for new parts not needed must be obtained from the dealer from whom they were
purchased.
Unless claims for shortages or errors are made immediately upon receipt of goods, they will not
be considered.
Inspect all goods received immediately upon receipt. When damaged goods are received,
insist that a full description of the damage be made by the carrier agent on the freight bill. If
this description is insisted upon, full damage can be collected from the transportation company.
No responsibility is assumed for delay or damage to merchandise while in transit. Dealer’s
responsibility ceases upon delivery of shipment to the transportation company from whom a
receipt is received showing that shipment was in good condition when delivered to them.
Therefore, claims (if any) should be filed with the transportation company and not with the
dealer.