Closer Pin
Flex Bracket
T-Screw
SLOW
FAST
5. Fitting the optional fascia
Mount the Flex bracket base plate with the 3
small screws
B
supplied.
2. Fit the Flex bracket base plate
Attach the Flex bracket
with the T-Screw to the
base plate, lift the brack-
et until it engages with
the closer pin and lock
in position by tightening
the T-Screw.
To disconnect the auto close func-
tion, simply loosen the T-Screw and
move the Flex bracket down until it
detaches from the closer pin.
The closing speed can be regulated
by turning the adjusting screw
clockwise for slower and anti-
clockwise for faster.
Check the opening and closing
operation for obstructions which
could effect the units performance.
To fit the optional fascia simply hang the fascia on the
top fixing blocks and press the bottom of the fascia
until it clicks into position.
3. Fit the Flex bracket
4. Regulate the closing speed
