HemoCue 201 DM, Reference Manual

Page: 39 / 203

34
Text mode
FIGURE 2-26
Only capital letters and a few special
characters can be used in the text mode.
Lower-case letters can only be entered into
the Analyzer by means of the Barcode
Scanner.
a) In the text mode, inputs are made using
the Letter buttons (1) and the Special
Character button (2).
b) The Erase button (3) erases the last input.
c) If a digit is to be entered, switch to the
numeric input mode by pressing the
Numeric mode button (4).
FIGURE 2-27
will be displayed.
d) When all information has been entered,
press the Confirm button (5).
1 Letter button
2 Special Character button
3 Erase button
4 Numeric mode button
5 Confirm button
Numeric mode
FIGURE 2-27
a) In the numeric mode, inputs are made
using the Digit buttons (1).
b) The Erase button (2) erases the last input.
c) If a letter or a special character is to be
entered, switch to the text input mode by
pressing the Text mode button (3).
FIGURE 2-26 will be displayed.
d) When all information has been entered,
press the Confirm button (4).
1 Digit button
2 Erase button
3 Text mode button
4 Confirm button
Operator ID
[
STU
YZ VWX
JKL
PQR MNO
ABC
GHI DEF
.-
2
1
123
5
3
4
0
7 9 8
4 6 5
1 3 2
Operator ID
1
ABC
2
4
3