1. Attach Hardware to Panels
Right Panel (R)
Left Panel (L)
Closest Hole
to Wheel
Closest Hole
to Wheel
Tip:
Use the Pin
Depth Guage to
make sure pin is
screwed to correct
depth.
26 mm
Head of Pin flush
with top of Guage
•
Place Left (L) and Right (R) Panels on a flat
surface as shown
•
Place seven of “Left” drawer runners on the Left
Panel (L). Repeat for Right Panel (R)
Left Drawer Runner
Right Drawer Runner
Using drawer screws, attach the drawer runners
as shown. Repeat until there are 7 runners on
each Left (L) and Right (R) panel.
Insert 4 wooden dowels in each Panel as shown.
Insert 9 Pins in each Left (L) and Right (R) Panel
as shown
Place 2 Small Clamps along the groove for each Left
(L) and Right (R) Panel as shown. Be sure it is
positioned so the groove remains open.
Yes
No
Orientation: Hole
Top Left
Orientation: Hole
Top Right
