HRMA-1206C
6 Zones Integrated Mixer Amplifier with USB/SD/FM
8
4. Z1 to Z6
- They activate the related zones.
5. LED Level Meter
- Indicate output level.
When all the five LEDs (+10dB) remain lit, it indicates that the sound
is distorted. In such case, adjust each volume controlling knob, until
LED element 4 (+8dB) and LED element 5 (+10dB) occasionally
flash.
6. Bass Control
- Adjust Bass response.
7. Treble Control
- Adjust Treble response.
8. USB/SD/TUNER VOL.
- Adjust USB/SD-Card/Tuner output level.
9. Line1/2/3 Volume
- Adjust Line input volume.
10. Mic1/2 Volume
- Adjust microphone volume.
11. MIC1 Input Jack
- Connect here microphones of unbalanced 30-600ohm
with 1/4″phone plug (6,3mm). Priority is active while the signal is sent to this
Mic1 input.
12. MP3 Player/TUNER Display
- When you connect a USB drive or as SD-Card,
It shows for about 1 second the total number of MP3 files in the directory,
then starts playback from first file on. In FM mode, it shows for 1 second the
station number, then its frequency.
13. USB Input Socket
- This Type-B female USB connector accepts USB drives
in FAT32 format (max. 32G-Byte) and plays MP3 files only (48.1kHz/16-bit @
256kpbs max).
Note: When insert a USB drive, the unit will automatically switch to USB
mode, and playback will start.
14. MP3/TUNER Player Control
- Use these 3 buttons to Play/Pause song re
-
production, to ship forward to next song, or backward to previous song.
15. Mode Selector Button
- Push repeatedly this button to choose between AUX
mode (LINE1/2/3 sources), and RADIO mode. If a USB drive or an SD-Card are
inserted in the related slots, it switches in turn to this modes too.
16. SD-Card Slot
- This SD-Card outlet accepts SD-Cards in FAT32 format (max.
32GByte) and plays MP3 files only (48.1kHz/16-bit @ 256kpbs max).
Note: When insert an SD-Card, the unit will automatically switch to USB