GLOBE-560XW
2-Way Coaxial Open-Ceiling Speakers
8
6.1. Example of 70V/100V System Configuration
5 speakers connected in parallel using 30W Taps
NOTE: Total number of speakers multiplied by tap value cannot
exceed the output power (in watts) of the 70V/100V amplifier. The
above examples shows 5 total speakers in a 100V system. If you use
30W tap position, you need an amplifier with at least 5x30=150W. A
good rule of thumb is to use an amplifier with 20% greater power; in
this case, an amplifier with 180W or more.
6.2. Example of Low-Impedance Configuration
2 speakers connected to 8Ω outputs of a stereo low-impedance amplifier
7. TECHNICAL PARAMETERS
7.1. Frequency Response Charts
NOTE: All Frequency charts below show dB SPL (1W @ 1m).