![HELVAR LL60/2-E-DA-iC Manual Download Page 3](http://html1.mh-extra.com/html/helvar/ll60-2-e-da-ic/ll60-2-e-da-ic_manual_2122535003.webp)
Helvar
|
Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com
Quantity of drivers per miniature circuit breaker 16 A Type C
Based on I
cont
Based on inrush current I
peak
Typ. peak inrush current I
peak
1/2 value time, Δt
Calculated energy, I
peak
2
Δt
38 pcs.
30 pcs.
42 A
189
µs
0.2381
A
2
s
CONVERSION TABLE FOR OTHER TYPES OF
MINIATURE CIRCUIT BREAKER
I (A)
T (ms)
I
peak
Δt
½ I
peak
MCB
type
Relative quantity of
LED drivers
B 10 A
37 %
B 16 A
60 %
B 20 A
75 %
C 10 A
62 %
C 16 A
100 % (see table above)
C 20 A
125 %
Type C MCB’s are strongly recommended to use with LED lighting. Please see more details in “MCB information” document in each driver
product page in “downloads & links” section.
Cool white
Warm white
High DYNAMIC
Low
10 %
2 %
100 %
Recommended dimming range
depending on the application
Intensity dimming range 100 - 1 %
Not
achievable
Factory
setting
• The LL60/2-E-DA-iC driver has 2 output channels used to control
the intensity and temperature of white colour as well known as
“Tunable White”
• These drivers respond to DALI type 8 (DT8) commands, which in
practice means that they only have 1 common address for both
output channels
• The tunable white level of intensity and colour temperature can be
set either with a DALI command or by Switch-Control
• The driver will operate correctly once tunable white LED module
parameters are programmed to the driver. Use “Helvar DALI
Driver Configurator” for the parameter setting
• Default LED module parameters are set according to Helvar iC
LED module specifications
• See Helvar DALI Driver Configurator user guide for more
information how to set the parameters to the driver
Tunable white functionality
Switch-Control with tunable white
N
Switch-Control
0
I
Color temperature
and intensity control
Retractive Switch
Helvar iC drivers provide the simplest form of control in tunable white
with Helvar patented single switch Switch-Control functionality. With
single push button the user is able to control both the light intensity
and colour temperature to the desired level. The system synchronises
the light levels and CCTs every time the colour temperature is
adjusted to ensure pleasant user experience and uncompromised
lighting comfort. More information about the functionality can be
found in Switch-Control user guide at www.helvar.com.
27.11.2018 3/6
LL60/2-E-DA-iC
T22 043 1C