WARRANTY AND LIABILITY:
Seller warrants that this product is free from defects
in manufacturing, materials and workmanship for a
period of two years. The liability of seller is limited
to deliver a new thermostat per faulty one
according to warranty statement above. Seller has
right to receive faulty units to be checked. Seller's
liability explicitly excludes everything exceeding
above condi ons.
For more informa on:
www.taelek.fi/docume
n ts
The Bluetooth®
trademark and logos are property of
Bluetooth SIG, Inc., and their usage is licensend for
Taelek Oy. Other brands and trade names are
property of the respec ve owners.
Apple
, the Apple logo, iPhone, iPad, and iPod touch
are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of
Apple Inc.
Play and the Google Play logo are trademarks
of Google Inc.
EN
BLE Thermostat
Installa on and opera ng
instruc ons
BLE THERMOSTAT – SETUP
TECHNICAL SPECIFICATIONS
Bluetooth:
Version 4.2
Power supply:
230V - 50Hz
Maximum load:
16A (resis ve)
Temperature range:
+5°C/+35°C
External Temperature setback:
230V - 50Hz
IP class:
IP21
Standard Color:
White
Sensors:
Built-in room sensor, external floor
sensor NTC and possibility to add wireless BLE
temperature sensor.
INSTALLATION
Installa on must be done by a qualified
electrician in accordance with wiring and
building regula ons. Before installa on,
disconnect any power to the thermostat’s
mains.
Installa on loca on must be within the BLE
range of the nearest Ac ve Ahead movement
sensor (appr. 10m).
In a factory new thermostat the front cover (A)
and frame (B) are loose and you can just pull
them out. If the visual parts are fixed then push
the rotary dial (C°) hard downwards and while
holding it down turn an -clockwise. The front
cover and the frame can now be pulled away
easily.
Connect the wires to the thermostat’s terminal:
SETBACK:
External Setback Wire (if applicable),
HEATING (N):
Hea ng Cable N connec on,
N:
Power N connec on,
FLOOR SENSOR:
Floor
temp sensor NTC,
HEATING (L):
Hea ng Cable L
connec on,
L:
Power L connec on.
Next, install the thermostat in wall moun ng
box and fasten it using 2-4 screws. Assemble
the frame. Check that fixing nails are in 'LOCK'
posi on. If not use screwdriver to push to
correct posi on. Push the front cover un l it
snaps in place. The front cover should now be
firmly fixed on all sides.
STARTUP
A er connec ng the power to the thermostat
for the first me thermostat recognizes if floor
sensor is connected or not and makes
ini aliza on accordingly (selects between floor
mode and air mode). Thermostat also ini alizes
the user program so that all hours are green
(eco hours) and Bluetooth is ready to receive
commands from presense sensor (receive
wireless eco controls is ON). The other
parameters are ini alized to default values:
Mode :
Floor / Air
Floor temperature min :
5°C / NaN
Floor temperature max :
27°C / NaN
Name of thermostat :
RANDOM number
User program ac vated eco temp :
19°C
Externally ac vated eco temp :
19°C
Floor temperature offset (calibra on) :
-3°C
Air temperature offset (calibra on) :
0°C
Air temperature min :
5°C
Air temperature max :
28°C
PWM min :
0%
PWM max :
100%
Valve protec on :
OFF
Sensor type :
10k ohm
Led intensity :
70%
Weekly program
: AUTO
Use ecoControl App to check and modify
se ngs.
BLE THERMOSTAT – USER MANUAL
BASIC USE
The thermostat is in eco mode by default.
Temperature set point is defined by the parameter
User program ac vated eco temp
. User can modify
different 24h/7d week schedule as well. Ac veAhead
occupancy message will automa cally force the
comfort mode for the next 10 minutes. In comfort
mode the temperature set point is defined by the
rotary dial (C°). The snow flake and maximum
symbols equal to “
min and max temperature”
specified in se ngs.
Eco mode can also be selected with an external
setback switch (230VAC). Target temperature for this
eco mode is defined in “
Externally ac vated eco
temp
” se ng and the default value is 19°C.
Power touch bu on
If red and green leds are both OFF the thermostat is
in stand-by mode. In stand-by mode hea ng is
forced OFF despite of temperature. Touch the
ON/OFF bu on to turn the thermostat ON.
- red led on → target temp selected by dial is reached
- red led fluctua ng → hea ng is on
- green led ON → eco temp se ng value reached
- green led fluctua ng → hea ng is on
Touching the ON/OFF bu on when either of the leds
is ON turns the device in stand-by mode.
ADVANCED USE
User may use a mobile device with ecoControl App
(Android / iOS) to read log temperatures, to make
se ngs and define a weekly user program. App also
can generate email reports. Follow the guides in
1 / 4