Heltec Automation HTE029A1 Technical Specification Download Page 24

Page: 24 / 30

www.heltec.cn

／

HTE029A1

HANDLING

，

SAFETY AND ENVIROMENTALREQUIREMENTS

WARNING

The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display

break, do not touch the electrophoretic material. In case of contact with electrophoretic material, wash with water and

soap.

CAUTION

The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronic

components.

Disassembling the display module can cause permanent damage and invalidate the warranty agreements.

IPA solvent can only be applied on active area and the back of a glass. For the rest part, it is not allowed.

Observe general precautions that are common to handling delicate electronic components. The glass can break and

front surfaces can easily be damaged . Moreover the display is sensitive to static electricity and

other rough environmental conditions.

Mounting Precautions

(1) It`s recommended that you consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to

the module.

(2) It`s recommended that you attach a transparent protective plate to the surface in order to protect the EPD.

Transparent protective plate should have sufficient strength in order to resist external force.

(3) You should adopt radiation structure to satisfy the temperature specification.

(4) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates

corrosive gas of attacking the PS at high temperature and the latter causes circuit break by electro-chemical reaction.

(5) Do not touch, push or rub the exposed PS with glass, tweezers or anything harder than HB pencil lead. And please do

not rub with dust clothes with chemical treatment. Do not touch the surface of PS for bare hand or greasy cloth. (Some

cosmetics deteriorate the PS)

(6) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks

with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach the PS. Do not use

acetone, toluene and alcohol because they cause chemical damage to the PS.

(7) Wipe off saliva or water drops as soon as possible. Their long time contact with PS causes deformations and color

fading.

Product specification

The data sheet contains final product specifications.

Summary of Contents for HTE029A1































Search results

Summary of Contents for HTE029A1

Reviews:

Related manuals for HTE029A1

Brands by name

Popular brands

Heltec Automation HTE029A1, Technical Specification

Search results

Summary of Contents for HTE029A1

Reviews:

Related manuals for HTE029A1

Brands by name

Popular brands