System
components
When the system is first delivered it is fully
assembled, folded up and clipped in place,
with its own carry bag.
Simply unclip the Posturite2 and lay it out
flat. Please familiarise yourself with each
component using the diagram below.
Once you recognise each component, please fit and adjust the unit
as shown on the following pages to ensure correct adjustment and
comfort.
1
2
3
3
4
1. BACKCUSHION - TRUNK SUPPORT
SHOWN
(OPTIONAL)
WIRE BACK (OPTIONAL)
WING BACK (OPTIONAL)
2. SEAT CUSHION - LOWZONEGEL2 (OPTIONAL)
AIRZONE (OPTIONAL)
3. ARM RESTS
- FLEXI-POSITION (OPTIONAL)
4. LEG SUPPORT - COMFORT LEG SUPPORT (OPTIONAL)
Component Details
Fitting & Adjustments
THE WINGED BACK
Locate the base of the winged back either on top or
behind the seat cushion as shown. Once in desired
position, clip and tighten the webbing strap.
To place the seat cushion correctly, turn the unit so the straight edge
is towards the back of the chair and the rolled front edge lines up
with the front of the chair.
Once the unit is placed on the chair, next lift up the back section
against the chair and fit accordingly. The seat and back are
connected and can be positioned to suit you.
THE TRUNK BACK
Place the trunk back either on top or behind the
seat cushion as shown. Once in place, clip and
tighten the webbing strap as indicated.
