manualshive.com logo in svg

Helmholz 700-751-HSM11, Manual, Page: 49 / 99

Share
Download
Helmholz 700-751-HSM11 Manual Download Page 49

 

Helmholz Modem 56k 4.1 

49 

Command Description 

AT+CMGS=<n>

  SMS dispatch directly via AT command 

Depending on the setting of 

AT+CMFG=<n>

, the command 

AT+CMGS=<n>

 will have 

a different syntax. 

Setting 

AT+CMGF=1

 (text mode): 

AT+CMGS=<phonenumber> 

The modem returns the “>” character and awaits the SMS text (up to 160 charac-
ters), ending with an EOF character (0x1A or STRG-Z). 

Notes: 

¾

 

Depending on the provider, the phone number must be entered in the for-
mat "0941xxxx" or "49941xxxx" (see

 AT*M

 and/or

 AT&Z2

). 

¾

 

After the sending procedure was successful, the modem returns “

+CMGS: 

000

”.

 

Setting 

AT+CMGF=0

 (PDU mode): 

AT+CMGS=<PDU string length> 

The modem returns the character “>” and awaits the PDU string, ended  
with an EOF character (0x1A or STGR-Z). 

Notes: 

¾

 

Depending on the provider, the phone number must be entered in the for-
mat "0941xxxx" or "49941xxxx" (see

 AT*M

 and/or

 AT&Z2

). 

¾

 

"Numbering Plan" is ignored. 

¾

 

The service center is defined by 

AT&Z0

, the SCA field in the PDU string is 

ignored. 

¾

 

Message header, confirmation SMS and validity period are not supported. 

¾

 

Data coding scheme: Only the “default alphabet” is supported.

 

¾

 

After the sending procedure was successful, the modem will return “

+CMGS: 

<MR>

”, where 

<MR>

 is the message reference defined in the PDU string.

 

AT+CPIN?

 

Dummy command for GSM compatibility 

AT+CPIN?

 responds with 

"+CPIN: READY"

.

 

Note: This command only serves for the purpose of compatibility with appli-

cations for GSM devices.

 

AT+CREG?

 

Dummy command for GSM compatibility 

AT+CREG?

 responds with 

"+CREG: 0,1"

.

 

Note: This command only serves for the purpose of compatibility with appli-

cations for GSM devices.

 

AT+CSQ 

 

Dummy command for GSM compatibility 

AT+CSQ

 responds with 

"+CSQ: 20.99"

.

 

Note: This command only serves for the purpose of compatibility with appli-

cations for GSM devices.

 

AT+CPMS?

 

Dummy command for GSM compatibility 

AT+CPMS?

 responds with 

"+CPMS: "MT",8,40,"MT",8,40,"MT",8,40

".

 

Note: This command only serves for the purpose of compatibility with appli-

cations for GSM devices.

 

Summary of Contents for 700-751-HSM11




































































































Reviews:

No comments