Helmer Scientific i.Series
®
- Platelet Agitator
Operation Manual
360390/A
7
Install Label Holders (optional)
1. Insert the tabs on the label holder into the slots on the drawer.
2. Pivot the holder around the drawer handle and align the hole on the label holder with the corresponding hole on the drawer.
3. Push thumb screw through the hole in the label holder and through the hole in the drawer to secure.
2.6
Load the Agitator
PF48-Pro agitator with platelet bags (shown in a Helmer PC900-Pro incubator).
CAUTION
When opening drawer, grasp handle (not label holder). Open one drawer at a time.
Open the drawer to be loaded and lay the platelet bags flat. The top of the storage frame may also be used for bag storage. Avoid
stacking bags. Maintain enough space around each bag for air circulation. For thicker bags, remove drawers. Place the bag tubing
under or around the bag.
Table 1
Model
Capacity
WBD/Random Bags
SDP/Apheresis Bags
PF15-Pro
15 (2 per drawer; 3 per shelf) 7 (1 per drawer/shelf)
PF48-Pro
48 (6 per drawer/shelf)
16 (2 per drawer/shelf)
PF96-Pro
96 (12 per drawer/shelf)
32 (4 per drawer/shelf)
