background image

Helmer Scientific Cart and Pedestal

User Guide

360382/B

3

About this Manual

This user guide is intended for use by end users of the countertop carts  or undercounter pedestal and authorized service technicians.
Generic references are used throughout this instruction to group models that contain similar features. For example, "105 
models" refer to all models of that size (iB105, HB105, iLR105, HLR105). This instruction covers all countertop and undercounter 

refrigerators and freezers which may be identified singly, by their size, or by their respective "Series."

1 .1  Safety Precautions and Symbols

Symbols found in this document

The following symbols are used in this manual to emphasize certain details for the user:

Task

  Indicates procedures which need to be followed.

Note

  Provides useful information regarding a procedure or operating technique when using Helmer 

Scientific products.

NOTICE

  Advises the user against initiating an action or creating a situation which could result in damage to 

equipment; person injury is unlikely.

CAUTION

  Advises the user against initiating an action or creating a situation which could result in damage 

to equipment or impair the quality of the products or cause minor injury.

 

 Symbols found on the units

The following symbols may be found on the refrigerator or refrigerator packaging:

Caution:  Pinch point hazard

Caution:  Unlock all casters

Caution:  Keep hands clear

Caution:  Refer to Instructions for Use

Avoiding Injury

Review safety instructions before installing, using, or maintaining the equipment.

 

Before moving unit, ensure door is closed and casters are unlocked and free of debris.

 

♦ Take care moving cart with refrigerator installed to prevent tipping when transitioning over height changes or floor gaps.

 

Do not roll cart with installed refrigerator over unprotected power cords.

 

Keep hands away from pinch points when removing and replacing panels on the cart or pedestal.

 

Avoid sharp edges when working inside the cart or pedestal.

 

Keep hands away from pinch points when closing the door.

 

Do not sit, lean, push or place heavy objects on top surface.

 

♦ Using the equipment in a manner not specified by Helmer Scientific may impair the protection provided by the equipment.

1 .2  General Recommendations

Intended Use

The Helmer countertop cart is available in two sizes. The tall cart is intended to elevate a single MLR102 model refrigerator and 
allow temperature-controlled transport of refrigerated medications and vaccines from one location to another within the facility. The 
short cart provides easy access for under counter placement.
The undercounter pedestal is intended to elevate a single 104 or 105 model refrigerator or freezer for ease of use.

 CAUTION

Do not place stacked units on top of a cart or pedestal.

Summary of Contents for HB105













Reviews: