2.1 Cable Connection
P
ower line connection:
Prepare power line with bare end.
Loosen the 2 screws of power connector of
device and insert the power line and screw tight.
The other end to power (110-240V)
▲
POWER LINE: 14-24AWG
Speaker cable connections
:
Plug off the connectors from device.
Prepare speaker cables with bare end.
Loosen the screw of the connectors and insert
the cables in and screw tight.
L+,L- is for one speaker for L channel.
R+,R- is for one speaker for R channel.
▲
SPEAKER CABLE: 16-28AWG
TV connections
:
Plug off the connectors from device.
Prepare one core coaxial cable with bare end.
Loosen the screw of the connectors and insert
the cables in and screw tight.
Cable core is for CVBS.
Shielding part is for G(GND).
The other end to TV coaxial connector.
▲
SIGNAL CABLE: 16-28AWG
Audio input
:
Plug off the connectors from device.
Prepare audio cable with bare end.
Loosen the screw of the connectors
and insert the cables in and screw tight.
Cable wires is for L and R
Shielding part is for G(GND).
▲
SIGNAL CABLE: 16-28AWG
2.2 Install the device
Get all the cables connections ready,
Pry off screen and amplifier part. Be careful in case ripping out the cable
connected in between.
Mounting the amplifier part on back box with screws.
Press the screen part on.
Chapter
2
:
Installation
★
For better sound quality, recommend to use cable with shielding.
★ ★★
Turn off the power before you do the wiring.
Audio output
:
Plug off the connectors from device.
Prepare audio cable with bare end.
Loosen the screw of the connectors
and insert the cables in and screw tight.
Cable wires is for L and R
Shielding part is for G(GND).
▲
SIGNAL CABLE: 16-28AWG
5
6
Helmer
