Helm HM1525, Instruction Manual

Page: 18 / 28

HM1525 Weigh Scale Module
Page 18
Data Map for HM1734-WM on Ethernet/IP
OUTPUT TAGS
Description
Output_bits_mod1.0 bit Set Cal Mode Bit
Output_bits_mod1.1 bit Set Run Mode Bit
Output_bits_mod1.2 bit Ch1 Clear Tare Bit (momentary)
Output_bits_mod1.3 bit Ch1 Tare Bit (momentary)
Output_bits_mod1.4 bit Ch2 Clear Tare
Output_bits_mod1.5 bit Ch2 Tare
Output_bits_mod1.6 bit Read mV/V sets
Output_bits_mod1.7 bit Read cal factor
Output_bits_mod1.8 bit Save to eeprom
Output_bits_mod1.9 bit Read adtrim
Output_bits_mod1.10 bit Auto cal mode
Output_bits_mod1.11 bit Set Ch1 scale
Output_bits_mod1.12 bit Set Ch2 scale
Output_bits_mod1.13 bit Ch1 auto-tune
Output_bits_mod1.14 bit Ch2 auto-tune
Output_bits_mod1.15 bit Read scale sets
Parameter_bits_mod1.0 BOOL Msf 1-2
Parameter _bits_mod1.1 BOOL Msf 2-4
Parameter _bits_mod1.2 BOOL Msf 4-8
Parameter _bits_mod1.3 BOOL Msf 5-10
Parameter _bits_mod1.4 BOOL Msf 6-12
Parameter _bits_mod1.5 BOOL Msf 7-13
Parameter _bits_mod1.6 BOOL Msf 8-14
Parameter _bits_mod1.7 BOOL Reserved
Parameter _bits_mod1.8 BOOL Zero band 25
Parameter _bits_mod1.9 BOOL Zero band 50
Parameter _bits_mod1.10 BOOL Zero band 75
Parameter _bits_mod1.11 BOOL Enable filter
Parameter _bits_mod1.12 BOOL Ch1 filter on
Parameter _bits_mod1.13 BOOL Reserved
Parameter _bits_mod1.14 BOOL Reserved
Parameter _bits_mod1.15 BOOL Ch2 filter on
Data Map for HM1734-WM on Ethernet/IP