8
Load the Ribbon
(
TT230SMC shown, SAME PROCESS for TT130SMC
)
1.
Open
the printer’s top cover by pulling the top cover open levers located on each
side of the printer and lifting the top cover to the maximum open angle.
2.
Open
the ribbon access cover.
Note:
1. In normal printing mode, ribbon access cover can be opened while opens the top cover.
Ribbon access cover can be closed while top cover is open or close.
2. In peeler and cutter mode, please open the top cover then the ribbon access cover can be
opened or closed.
3.
Insert
the paper core right side onto the rewind hub.
Align
the notches on the left
side and mount onto the spokes.
Summary of Contents for TT130SMC
