background image

 

Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire. 

 

Do not plug this unit into an extension lead, double adaptor or power board. 

 

Do not use the appliance for other than its intended use. 

 

Do not use outdoors. FOR INDOOR USE ONLY. 

 

This unit is not intended for use in bathrooms, laundry areas or similar moist indoor locations. 
Never locate the unit where it may fall into a bathtub, sink or any other water container. 

 

Do not run the power cord under carpeting or cover the power cord with throw rugs, runners or 
the like. Arrange the power cord away from traffic areas and where it will not be a hazard to 
persons. 

 

Do not place the power cord over any part of the unit. 

 

Do not leave the appliance unattended when switched on. 

 

Do not cover the grill, or operate in close proximity to curtains etc. 

 

Do not block air circulation. 

 

Do not move the machine when it is switched ‘On’ and in use.

 

 

Place the machine on a level surface. 

 

To disconnect the unit, set the main switch to ‘OFF’ then remove the plug from the outlet.

 

 

This unit has hot electrical parts inside. DO NOT use it in areas where gasoline, paint or 
flammable liquids are used or stored. 

 

Unplug the appliance during filling and cleaning. 

 

This product must always be used and stored in the upright position. 

 

The use of attachments or accessories not recommended or sold by the product distributor may 
cause personal or property hazards or injuries. 

 

This product is intended for normal domestic/household use only. 

 

Use this fan as described in this manual. Any other uses, not recommended by the manufacturer, 
may cause fire, electric shock, or injury to persons and may void the warranty. 

 

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 
supervision or instruction concerning the use of the appliance by a person responsible for their 
safety. 

 

The installation of a residual current device (safety switch) is recommended to provide 
additional safety protection when using electrical appliances. It is advisable that a safety switch 
with a rated residual operating current not exceeding 30mA be installed in the electrical circuit 
supplying the appliance. See your electrician for professional advice.  

 

WARNING: If the supply power cord is damaged, the power cord must be replaced by the 
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 

 

This product has not been designed for any uses other than those specified in this booklet. 

 

 

 
 
 
 
 
 
 
 
 

 

 
 

 
 

SAVE THESE INSTRUCTIONS 

Summary of Contents for WAL40P







Reviews: