Operating Instructions
Before inserting the plug into a power outlet, make sure that the correct voltage being used corresponds to
what is indicated on the rating label, and that the socket has an earth facility.
1.
Insert plug to the electrical outlet, and the indicator light turns on.
2.
Press the “ON/SPEED” button to choose Low, Med, or High speed that matches the light on the control
panel.
3.
Press the “MODE” button to choose the wind type from one of the following:
•
Normal: Wind flow based on Low/Med/High speed.
•
Breeze: Imitates the flow of natural wind based on strong and soft wind.
•
Sleep: The fan runs for half an hour on strong then soft natural wind mode, then changes to soft
natural wind for the next half hour, and then the fan turns off automatically.
•
Setting H: Operation pattern: H
→
Stop
→
H
→
Stop
→
H
•
Setting M: Operation pattern: M
→
stop →
M
→
Stop
→
M
•
Setting L: Operation pattern: L
→
Stop
→
L
→
off
→
L
•
Press “SWING” to start oscillation; press again to fix the airflow direction.
•
Press “HUMIDITY” to start the humidifying function; mist comes out of the front plate if there is
water in the tank.
The MIST function can be used on its own or with the fan function to blow the mist into the room.
1.
Press the “TIMER” button to set the timer. There are 4 indicator lights for automatic timing. To set a
time of 7.5 hours you need to press 15 times so all the 4 indicator lights light up.
2.
The Remote Control must be pointed towards the Remote Sensor on the main unit for best results. If the
remote control doesn't operate as expected, replace the batteries (2 AAA batteries).
