PARTS & FEATURES
1.
Front Guard
2.
Blade Nut
3.
Blade
4.
Guard Mounting Nut
5.
Back Guard
6.
Motor Shaft
7.
Motor Housing
8.
Oscillation Knob
9.
Stand
10.
Speed Control Switch (0,1,2,3)
11.
Base
12.
Screws
BEFORE FIRST USE
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.
ASSEMBLY INSTRUCTIONS
1.
Fix the base into the stand with the 4 screws.
2.
Loosen the guard mounting nut from the motor housing.
3.
Fit the rear guard onto the motor housing firmly and fasten by turning the guard mounting nut
tightly, but do not over tighten.
4.
Fit the blade onto the motor shaft.
5.
Connect the front guard to the rear guard and clip them together with the clips provided.
6.
Both guards must be secured with the screws provided.
