HELLER HECS11 Instruction Manual Download Page 7

5.

 

Disconnect the electric motor connection and remove the complete filter assembly by pulling out 
from the top and then lifting the filter assembly - up and out. 

6.

 

The air filter is connected into the back cover via two clips at the top. Release by pressing the two 
clips down and give it a little push. Care full not to damage the filter. 

CAUTION:  Do not immerse or allow the motor or electric cables to come in contact with any liquid. 

i.

 

Do not immerse the Photo catalysis filter in water or any other liquid. This filter should not be 
allowed to become wet. It should be placed in a sunny position to reactivate it. 

7.

 

The water curtain is supported by two rollers, which can be removed for cleaning with mild soap. It 
is recommended to be cleaned once every 6 months 

8.

 

Wipe out and dry the water reservoir. Replace the water drainage plug. It is recommended to be 
cleaned once every 1-2 months 

9.

 

Dry the filter and filter assembly and the water curtain before re-assembling. 

10.

 

To clean the exterior surfaces simply wipe over with a soft damp cloth. Should it be necessary, 
greasy marks may be removed from the surfaces by using mild soap and a cloth dampened in hot 
water. Avoid all other types of detergents, cleaners, solvents that may contain chemicals which 
could damage parts of the unit. Thoroughly dry all parts before storage. 

11.

 

Store in a cool dust free location for next use. 

 
Troubleshooting 
 

Always check full product operation as detailed above before returning any product as faulty. 

On humid days the unit may not appear to be cooling correctly. This is due to the air already being saturated 
with water. Adding more water to the air will not result in reducing the air temperature. In these conditions, 
it is advisable to operate the unit as a fan to circulate room temperature air. 

Specifications  

Rated voltage frequency 

220-240VAC    50Hz 

Input power 

70W 

Max. Air Volume 

>20m³/min 

Water Tank Capacity 

10 Litres 

Modes / Functions 

New Weight 

6kg 

Dimensions 

300 x 397 x 650mm 

 

Australian Customer Service 

GAF Control (Sales) Pty Ltd  
P.O Box 19  
Altona North Victoria 3025  
Phone: 1300 659 489  
Hours: 9am-5pm (EST) Mon-Fri  
www.gafcontrol.com.au  
*This product may vary slightly to the product illustrated due to ongoing product development. 

 

Summary of Contents for HECS11








Reviews: