6
OPERATION
Your heater may be operated by using either the manual controls located on the front of the fan or by your
remote control.
POWER SWITCH ON THE BACK OF THE UNIT
Used to turn the heater ON and OFF. This should be used to turn off the appliance before leaving unattended.
CONTROL PANEL AND SETTINGS
SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the airflow is
slowly moved from side to side and the Swing indicator will be illuminated
MODE BUTTON
Press to cycle through the three available modes:
Fan, Low Heating and High Heating
TIMER BUTTON
Press repeatedly to increase the running time in 1 hour intervals. The timer can be set between 1 hour and
12 hours. The display will show the duration currently set. When the display is showing the timer duration
the symbol will illuminate next to the timer. To cancel the timer repeatedly press the timer button until 00
is shown.
TEMP BUTTON
Press repeatedly to increase the desired room temperature. After pressing the temp button the desired
temperature will flash for 3 seconds, before the unit reverts to showing the room temperature. When the
desired temperature has been reached the unit will change into fan mode.
LIGHT BUTTON
Press light button can open ambient light. Blue, Green, Purple and White four colors light.
ON/OFF BUTTON
Used to turn the bladeless heater ON and OFF.
Swing
Mode
Timer
Tem.
Light
ON/OFF
