Below are the colour/value that can be displayed:
Ring Colour
Particulate Matter Value (Range)
Air Quality Status
Green
0-100
Good
Yellow
101-200
Average
Red
201+
Poor
Filter Replacement Indicator: The Replace HEPA light on the display will illuminate and
flash indicating that it is time to replace your filter. Replace the filter according to
directions (refer to CARE, CLEANING & MAINTENANCE
–
FILTER REPLACEMENT) then
press and hold TIMER button on your purifier for 5 seconds to reset the system.
UV Bulb Replacement Indicator:
The ‘UV’ light on the display will flash when it is time to
replace the UV bulb. Replace the bulb according to direction. (Refer to CARE, CLEANING &
MAINTENANCE
–
INSTALLING AND REMOVING UV-C BULB). To reset the UV-C Replacement
indicator, press and hold the UV button to reset system. Hold for 5 seconds and change reset to start.
** Control Panel Beep/ Sound: The sound emitted from pressing the buttons on the control panel can be
turned off/on by holding the SPEED button for 5 seconds.
CARE, CLEANING & MAINTENANCE
•
Your appliance must be switched OFF via the main power supply and unplugged before proceeding
with any cleaning.
•
To clean the exterior surfaces simply wipe over with a clean, dry soft cloth. Avoid all other types of
detergents, cleaners, solvents that may contain chemicals, which could damage parts of the unit.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the appliance.
•
Clean the filter monthly with the brush or nozzle of your vacuum cleaner.
•
Never immerse the appliance in water.
•
Never spray the appliance with liquids or submerge it in water or any other liquid.
•
Do not stick any foreign objects or your fingers inside the unit.
To Remove & Clean (or Replace) Filter:
The Replace HEPA light will flash continuously indicating that it is time to replace your
filter. Replace the filter according to directions then restart the system. Depending on
usage, filter will last approximately 12 months (however this can vary depending on the
air quality).
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
