Reverse Door
Tool(s) required:
Phillips screwdriver, Flat-bladed screwdriver, Hexagonal spanner
•
Ensure the unit is unplugged and empty.
•
To remove the door, it is necessary to tilt the unit backwards. It is highly recommended
to rest the unit on something solid, so that the appliance will not slip during the door
reversing process.
•
All parts must be removed must be stored to perform re-installation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It is recommended for 2 people to handle the unit during assembly.
1.
Remove the two screw positioned at the rear side of
the top cover.
2.
Remove the top cover and thermostat knob then
place it aside.
3.
Unscrew top hinge and remove the door and place it
on a soft surface or similar surface to prevent scratches
and damage.
