5.
To switch the heater OFF anytime, press
button until the “FAN” indicator flashes. The fan
heater will continue to operate for 10 -15 sec, and then it will switch OFF.
Remote:
1.
Press
button, the heater will switch ON and the fan will blow.
2.
Press MODE button, to operate at 1000W mode. The 1000W indicator will light up.
3.
Press MODE button again, to operate at 2000W mode. The 2000W indicator will light up.
4.
Press SWING button, to operate the Oscillation mode. The “SWING” indicator light up. To remove
the swing function, press SWING button again. This will stop the swing function.
To switch the heater OFF anytime, press
button on the remote, the “FAN” indicator flashes. The fan
heater will continue to operate for 10 -15 sec, and then it will switch OFF.
NOTE: The heater will switch OFF after 10-15 sec operation. This will allow the fan heater to cool off.
Timer function:
Timer function allows the fan heater to operate continuously for 30 min. intervals, and can be programmed
up to 7.5 hours before automatically turning OFF. This instruction applies for both Manual and Remote
operation.
1.
Press TIMER button once for 30min operation before turning OFF.
2.
Press TIMER button again for 1 hour. Repeat this process until the desired operation time is achieved
before automatically switching OFF.
3.
The time indicator will light up, example, if the timer is programmed to operate 5.5 hours before
SHUT OFF, the indicator 4h, 1h, and 0.5h will light up on the CONTROL PANEL.
4.
To remove the timer function. Press TIMER button until ALL time indicators are OFF (no lights on).
Battery
The remote control uses 2 x AAA battery. We recommend the use of Lithium type batteries for longer use.
Note: Please follow battery disposal instruction on the battery packaging, or contact your local councils for
safe disposal of batteries.
Safety System
•
In the event of abnormal overheating, a safety device shuts down the appliance automatically. After
a short cooling down phase, the appliance is ready for use again.
•
If you still notice the same defect as above mentioned, remove the plug from the socket and consult
your authorized dealer to your after-sales service department.
•
During use, do not touch or cover the air outlet. This may cause the unit to overheat, and the safety
device to operate.
