Features
Operating Instructions
1.
Carefully remove the heater from the plastic bag and carton.
2.
Place the heater on a firm level surface.
3.
Ensure the power switch is set to ‘Off’.
4.
Insert the plug into a suitable power outlet and turn the power supply on.
5.
Turn the power switch (located at the back of the heater) ‘On’. The heater is in standby mode.
6.
Turn the heater ‘On’ by pressing the ON/OFF button on either the remote or control panel. The
heater will begin to operate in fan mode.
7.
Press the POWER button once to operate in 1200W mode, or twice to operate in 2400W.
8.
To turn the heater ‘Off’ press the ON/OFF button. Please note: the unit will take approx 60 seconds
to stop blowing out air. Turn the switch off at the back of the unit.
WARNING: Allow the heater to cool down for 30-60 seconds before switching on again and before turning off
at the power outlet. This will protect the inner parts.
TIMER FUNCTION:
The timer function can be used in any mode. The timer allows you to set the length of time from 1-8 hours.
To use the timer, press the timer button. Each press of the button increases the time set by 1 hour. The
amount of time set will be displayed on the unit, and will count down in 1 hour. If the timer has been set for
8 hours (MAX amount of time) pressing the button once more will reset the Timer Function.
OSCILLATION
1.
Press the OSC button to turn the oscillation function ‘On’.
2.
Press the OSC button again to turn the oscillation function ‘Off’.
Indicator Panel
Trim Strip
Filter Bracket & Filter
Right Frame
Main Switch
Base
Handle
Wind Outlet
