Installation Instructions and Instructions for Use
Subject to technical modifications – Date of Issue May/2020
3
Safety instructions
These installation instructions refer to prefabricated elements, that (1) for
100% are made from parts, which are defined by us, and (2) which are made
in manufacturing processes, which are defined by us too; in all other cases
we do not provide any guarantee!
The safety instructions as well as the appropriate instructions must be read
carefully before installation and use. In case of non-observance of the direc-
tions and information given in these instructions and in case of improper
installation and operation or unintended use, the manufacturer shall not
accept any warranty claims concerning any damage to the product. In these
cases the liability for consequential damage to any parts or persons is ruled
out as well.
- Follow the described installation steps and pay attention to recommenda-
tions and notes.
- Keep these instructions in a safe place.
- All installation and removal works, as well as maintenance and repair
works are only allowed to be carried out by authorised and qualified spe-
cialist staff.
- Observe the regulations for prevention of accidents of the employer's
liability insurance association!
- Before operation check the unit for visible damage. If the unit is damaged,
it should not be used; please consult authorized specialist staff immedi-
ately.
- Only use unmodified original parts from HELLA.
- In case of unauthorised opening of the device, improper use, incorrect
installation or incorrect operation, there is a risk of damage to persons or
property.
- Never let children play with the unit.
Use ONYX.NODE in dry rooms only.
Installation Instructions and Instructions for Use
4
Subject to technical modifications – Date of Issue May/2020
Safety instructions
Attention! Risk of injury or danger to life due to an electric shock!
- Set-up, examination, commissioning and error correction of the unit must
only be performed by authorised or trained expert staff (as per VDE
0100).
- Switch off the current to the connecting lines when working at the unit.
There is danger to life! Take safety precautions against unintentional
switching on!
- Check the electrical wires regularly for damage. Do not use the unit if any
damage is found.
Observance of regulations and rules
The building owner is responsible for the observance of statutory rules and
country-specific provisions on site.
Designated use
The control device ONYX.NODE may only be used for the control of outdoor blinds / exte-
rior Venetian blinds, roller shutters, awnings and facade blinds that are provided with
drives, which are intended for this use. With ONYX.NODE, the lighting may be used up to
the performance data given. Any use other or beyond that is not considered intended use.
The connection of external devices must be carried out in consultation with the specialist
staff. ONYX.NODE is a single control device, which means that only one drive can con-
nected per ONYX.NODE.
- It is not allowed to use radio system in areas with an increased risk of
interference (e.g. hospitals, airports).
- The remote control is only admissible for devices and systems, where a
malfunction in the transmitter or receiver does not pose a risk to persons,
animals or objects, or if this safety risk is covered by other safety installa-
tions.
-
Follow the wiring diagram precisely!
- We cannot accept responsibility for damage, that can result from improper
installation.
Installation Instructions and Instructions for Use
Subject to technical modifications – Date of Issue May/2020
5
Scope of delivery
The following components are included in the scope of delivery:
- Control device ONYX.NODE (quantity as per purchase order)
- Short instructions control device ONYX.NODE
Device description
ONYX.NODE
Art. no. 50680002
220-240 V AC / 50-60 Hz
ONYX.NODE is a control device for the interior (flush-mounted socket). It is suitable for the
control of 230 V Venetian blind, roller shutter and awning motors, as well as for the switch-
ing on/off of 230 V lights.
1
2
3
4
5
6
7
8
9
10
11
Fig. 1: Connections:
Legend
1
No function
7
Mains connection input N
2
Pushbutton connection DOWN
8
Mains connection output N
3
Pushbutton connection UP
9
Motor connection DOWN
4
Pushbutton conn
10
Motor connection N
5
Mains connection input L
11
Motor connection UP
6
Mains connection output L
Installation Instructions and Instructions for Use
6
Subject to technical modifications – Date of Issue May/2020
Technical data
Input
220-240 V AC / 50-60 Hz
Output
450 VA
Nominal capacity
0.3 W
IP rating
IP20
Admissible ambient temperature
0 °C to +55 °C
Radio frequency
868.3 MHz
Transmission power
12.6 mW
Installation type
Flush-mounted box min. ø65 mm (inside),
depth min. 60 mm; surface-mounted in
corresponding surface-mounted casing
Dimensions LxWxH
49x49x24.5 mm
Weight
48 g
Installation
Prior to starting the installation, check the proper function of the transmitter
and the receiver at the desired installation position. The flush-mounted box
must be fastened in a way that the drilled hole does not hit wiring. Extended
instructions for the electrical installation can be found in the download area
of our website http://www.hella.info.
Minimum requirements flush-mounted socket: ø65 mm (inside), 60 mm
deep.
1. Place the ONYX.NODE in the box.
2. Connect the stripped cables without end sleeves, as shown in Fig. 2.
