7
//
GB
ELEctronic rotAting bEAcon
connEcting tHE rotAting bEAcon
mounting tHE rotAting bEAcon
Our new rotating beacon generation has 7 super-bright SMD
LEDs and contains 13 adjustable programs, 6 of which are rotation
programs and 7 are stroboscope programs, which can are selecta-
ble depending on the purpose of use. The rotating beacon also
has an integrated „Memory Function“. Two different settings (e.g.
one rotation setting and one stroboscope setting) can be saved
and activated/deactivated or changed over on the remote control
system using a switch channel (3-position switch On/Off/On).
Each rotating beacon is provided with a 3-wire servo connecting
cable with the following assignments: Orange - pulse/signal, red -
plus, brown - minus.
Please ensure that the cable is not assembled until the rotating
beacon has been installed, since this makes the cables easier to
lead through the hole.
WARnInG!
Reversing the polarity of the cables will inevitably lead to
damage or malfunctioning of the rotating beacon.
>> Please ensure that the cable is not assembled until the
rotating beacon has been installed, since this makes the
cables easier to lead through the hole.
1 Determine installation location of rotating beacon(s) on cab /
vehicle
2 Make 4.5 mm mounting hole
3 Installation materials for compensating for the roof slope (+/-5°)
are included in the scope of delivery.
After installing the rotating beacon(s), the servo cable can be
assembled.
Cable assignments: Orange - pulse/signal, red - plus, brown -
minus.
TOP TIP: If a Y servo cable is used, two rotating beacons (e.g. cab)
can be activated/deactivated or the program changed from the
remote control using a switching channel (3-position switch On/
Off/On).
red
brown
orange
Summary of Contents for Carson 500907214
Page 11: ...11 Notizen Notes ...
