Hella Gutmann SEG V, User Manual

Page: 98 / 1106

EN
Device configuration SEG V
Configuring interfaces
7.6.8.3 Switching Off Level Compensation
Proceed as follows to switch off the level compensation:
1. Select Settings > Device > Extended in the main menu.
2. Open the selection window under Level compensation with .
3. Open the list under Level compensation with .
4. Select >Off< .
When >Off< is selected, level compensation is switched off.
5. Confirm the selection with . Abort the procedure with .
The selection is saved automatically.
7.6.9 Starting the factory reset
Use this function to reset the device to factory settings.
All customer-specific data records will be reset if you perform the factory reset.
Proceed as follows to perform a factory reset:
1. Select Settings > Device > Extended in the main menu.
2. Use to start the factory reset under Start factory reset .
Observe the confirmation prompt.
3. Confirm the confirmation prompt with .
The device will be automatically reset to the state of delivery.
7.7 Configuring interfaces
Make your WLAN and e-mail settings here.
Wi-Fi is a wireless local area network. Data is transmitted wirelessly via a router and DSL modem (access point). The
respective devices register in the Wi-Fi router.
7.7.1 Searching and Installing a Wi-Fi Interface
Proceed as follows to connect the device to a network (router) via Wi-Fi interface:
1. Select Settings > Device > Interfaces > Wi-Fi in the main menu.
2. Open the list under IP address mode with .
If >Determine automatically (DHCP)< (recommended) is selected, the DHCP server of the network will assign an
IP address to the SEG V automatically. This option is set ex works.
If >Manual< is selected, then under SEG V – IP address , a free IP network address must be entered, e.g.:
• Network mask
192.168.246.002
• Standard gateway:
192.168.204.2
3. Select >Determine automatically (DHCP)< (recommended) or >Determine manually< .
The selection is saved automatically.
4. Create wireless network with .
The Wi-Fi connection search is active.
Once the device has successfully finished the search for a Wi-Fi connection, a drop-down list of Wi-Fi networks
found is displayed.
5. Select a Wi-Fi network.
98