Hella Gutmann MT 56, Operating Instructions Manual

Page: 26 / 292

EN
User Information
MT 56
Safety Precautions
2 User Information
2.1 Safety Precautions
2.1.1 General Safety Precautions
• The MT 56 is exclusively intended for use on a vehicle. It is a precondition for the use of the MT
56 that the user has knowledge of automotive engineering and is therefore aware of the
sources of danger and risks in the shop and on the vehicle.
• Please read the entire operating instructions thoroughly and, where necessary, the user
manual for the mega macs 56 and mega macs X in connection with the MT-HV before using
the MT 56.
• All notes shall apply which are given in the individual sections of the MT 56 operating
instructions and in the user manuals for the mega macs 56 and the mega macs X in
connection with the MT-HV. All the symbols on the MT-56 and the following measures and
safety precautions shall also be observed.
• Furthermore, pay attention to all general instructions from labour inspectorates, trade
associations and vehicle manufacturers as well as all laws, legal ordinances and instructions
which have to be commonly obeyed by a repair shop.
2.1.2 Safety Precautions for the MT 56
In order to avoid incorrect handling and injury to the user or destruction of the MT 56 arising from
this, pay attention to the following:
• Protect the MT 56 and the connecting cables from hot parts.
• Protect the MT 56 and the connecting cables from rotating parts.
• Regularly check connecting cables/accessory parts for damage (destruction of the MT 56 due
to short circuit).
• Insert the MT 56 into the module slot only in accordance with the operating instructions.
• Keep the MT 56 away from fluids such as water, oil or gasoline. The MT 56 is not waterproof.
• Protect the MT 56 from strong impacts and do not drop it.
• Do not open the MT 56 on your own. Only technicians authorized by Hella Gutmann are
allowed to open the MT 56. Warranty and guarantee will be rendered void at any case of
unauthorized tampering of the MT 56 or if the protective seal is damaged.
• Immediately contact Hella Gutmann or a Hella Gutmann trading partner in case of any
malfunctions of the MT 56.
26