mega macs PC
5. Insert the PC VCI into the vehicle's diagnostic port.
Both LEDs of the PC VCI flash. The PC VCI is ready for operation.
6. Select
>Diagnostics<
in the main menu.
Now you can select the type of diagnostics.
8.2.2
Performing Diagnostics
Proceed as follows to perform diagnostics:
1. Perform steps 1 to 5 as described in section
2. Use
to select the desired diagnostics under
Function
,
Assembly
and
System
.
3. Observe the information window, note window and instruction window
as applicable.
4. Start the communication with .
The diagnostic procedure between the mega macs PC software and the
PC VCI is realized with Bluetooth.
Connection to the PC VCI is established if the
symbol changes from
black to green.
5. Repair the vehicle. Then delete the saved trouble codes from the
vehicle system.
8.2.3
Calling Up Vehicle Information
Here you have an overview of the vehicle information including the
following:
24
