EN
mega macs ONE
8 Settings
Configure the mega macs ONE application under
>Settings<
.
8.1
Language Setup
NOTE
The language setting will be adopted when the application is installed for the first time.
Proceed as follows to set the language:
1. Select
> Settings
.
2. Open the drop-down list under
Depiction
.
3. Select the requested language.
The requested language has been set.
Adopt and save your settings with
>Save<
.
8.2
Entering company data
NOTE
Here you can enter the company data, that shall appear on the hard-copy printout.
Proceed as follows to enter the company data:
1. Select
> Settings
.
2. Open the virtual keypad under
Company data
.
3. Enter the company data in the intended text fields.
Company data have been registered.
Adopt and save your company data with
>Save<
.
8.3
Setting the ONE VCI Alarm
Proceed as follows to set the ONE VCI alarm:
1. Select
> Settings
in the main menu.
2. Activate the check box
Monitoring alarm active
to activate the ONE VCI alarm under
VCI
.
3. If applicable, use the text fields below it to enter the requested
Time from connection termination until
monitoring alarm [s]
and the
Monitoring alarm duration [s]
.
Adopt and save your settings with
>Save<
.
45
Summary of Contents for mega macs ONE
Page 1: ... HBMMDV6500ML0222S0 460 994 17 02 22 User Manual mega macs ONE ...
Page 2: ......
Page 4: ...4 ...
