Hella Gutmann Mega Macs 77, User Manual

Page: 100 / 1515

EN
User Information mega macs 77
Safety Precautions
3 User Information
3.1 Safety Precautions
3.1.1 General Safety Precautions
• The device is intended for use on motor vehicles only. It is a precondition for the use of the
device that the user has knowledge of automotive technology and is therefore aware of the
sources of danger and risks in the workshop and on motor vehicles.
• Please read the entire user manual thoroughly and carefully before using the mega macs 77.
• All notes given in the individual sections of this user manual apply. All the symbols on the MT
77 and the following measures and safety precautions must also be observed.
• Furthermore, pay attention to all general instructions from labor inspectorates, trade
associations and vehicle manufacturers as well as all laws, legal ordinances and instructions
which have to be commonly obeyed by a repair shop.
3.1.2 Safety Precautions – Risk of Injury
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the
vehicle. Therefore regard the following:
• Prevent the vehicle from rolling.
• Additionally place gear selector lever of AT vehicles to park position.
• Deactivate the start/stop system to avoid an inadvertent engine startup.
• Connect the device to the vehicle only when ignition is switched off.
• Do not reach into rotating components when engine is running.
• Do not run cables near rotating parts.
• Check the high-voltage parts for damage.
100