7 / 48
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
14.04.2020
Version 1.18.0
Introduction
REST
1 Introduction
The APS is a high precision people sensing device which generates people counts, occupancy information or wifi logging.
Usually the generated data is sent to a central server in a remote location. This server will then perform data analytics and
maintenance evaluations. As it is usually not possible to pull the data from a device in an in-store network, we established a
push interface using SOAP-XML.
Lately, we've received requests from customers, that already have servers or gateways in the in-store network and would
prefer a pull interface. In order to fulfil this requirement, we've started to implement a REST API. This document describes
the initial implementation of the REST API.
This interface will be available with firmware version 1.10. In the first implementation the interface will only give access to
basic information of the device. It will be extended in the following firmware versions.
This specification is preliminary and may change during implementation. It shall give an overview of the basic concept and
the available data.
Support
Service requests can be sent to the following e-mail address:
[email protected]
The general contact information is shown on page 2.
