HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 40

Page: 40 / 179

40 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Structure and function

APS-90, APS-180 and APS-90-Outdoor-PoE

Digital Input

Digital output

3.4.2

Digital inputs / outputs

Digital inputs are available on the following devices:

Device

Digital inputs

APS-90E-IO

APS-180E-IO

APS-90-Outdoor-PoE

APS-90-IO-8GB

APS-180-IO-8GB

The digital input can be used instead of a counting line.
In this use case an external device sends an impulse as counting information. There is no

distinction between incoming and outgoing counting or between adult and children.

Digital outputs are available on the following devices:

Device

Digital inputs

APS-90E-IO

APS-180E-IO

APS-90-Outdoor-PoE

APS-90-IO-8GB

APS-180-IO-8GB

The digital output can be used to give a signal, if persons stay for some time in the moni-

tored zone or if a defined number of persons are in the zone.
The digital output can be used to signal a count event.

3.4.3

Data File Recording

The counting results of the device can be logged periodically. The results are stored inter-

nally as text files in CSV format, and these counts are accumulated between each log. The

results (with time stamp and other data) are written to the file with separate columns for

each counting line.
Wireless tracking data can also be logged. This includes time stamps and the MAC

address and signal strength of the scanned wireless devices (e.g. mobile phones).
Statistic Values for zone monitoring can be logged. This includes the number of objects,

the maximum number of objects, the maximum length of stay of objects and the average

length of stay of objects. The values (with time stamp and other data) are written to the

file with separate rows for each monitored zone.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands