background image

english

8

Woofer installation

Main features

CAUTION: 
Make sure that all speaker wiring is fully protected
from cutting or wear. Any short circuits developing as
a result could severely damage the radio/cassette unit
or amplifier. Make sure that all speaker wires easily
reach the speaker terminals with stress on the wire or
connectors.

Securing the loudspeaker 

Once you have tested the complete speaker system and
have confirmed correct operation, turn the audio system off
and prepare the loudspeaker for final mounting.

1. Place the loudspeaker within the mounting ring as
shown in the illustration below.

2. Position the loudspeaker assembly into the mounting
hole and confirm correct mounting screw hole location.
Proceed to insert mounting screws through the loudspea-
ker mounting assembly and use the provided screw clips to
capture the screw. Tighten all screws evenly.

3. Place the speaker grille within the basket and mounting
ring and make sure the grille makes contact with the grille
mounting adhesive.

H 236 PRECISION

25 mm soft dome tweeter with neodyme magnet

165 mm mid/bass with paper cone

special rubber edge surround for high loadability 
and long service life

high-quality, stable metal basket for reducing resonance

Euro-DIN basket for easy installation in virtually any 
vehicle type

solid grille for effective speaker protection

H235 PRECISION

25 mm soft dome tweeter with neodyme magnet

130 mm mid/bass with paper cone

special rubber edge surround for high loadability 
and long service life

high-quality, stable metal basket for reducing resonance

Euro-DIN basket for easy installation in virtually any 
vehicle type

solid grille for effective speaker protection

H234 PRECISION

25 mm soft dome tweeter with neodyme magnet

100 mm mid/bass with paper cone

special rubber edge surround for high loadability 
and long service life

high-quality, stable metal basket for reducing resonance

Euro-DIN basket for easy installation in virtually any 
vehicle type

solid grille for effective speaker protection

Flexible 2-way frequency crossover

with
- tweeter level adjustment -3 / 0 / +3 dB with 

gold plated repositionable jumpers

-  4 ohm / 2 ohm switchable for the operation of 

two woofer systems

- integrated tweeter protection

LAYOU_PREC_final  16.05.2006  13:41 Uhr  Seite 8

Summary of Contents for Precision H 1







Reviews: