background image

5

Dear Customer,

congratulations on your purchase of this high-quality HELIX

PRECISION amplifier. This series highlights best quality,

excellent manufacturing and state-of-the-art technology.

After 27 years of experiences in the research & develop-

ment of audio products this amplifier generation sets new

standards. The attractive typical HELIX PRECISION design

makes this amplifier an outstanding and top of the class

product. 

We wish you many hours of enjoyment with your new

HELIX amplifier. 

Yours

AUDIOTEC FISCHER Team

General installation instructions for HELIX amplifiers

To find out how HELIX amplifiers work best for you, read this

manual carefully and follow the instructions for installation. We

guarantee that this product has been checked for proper functio-

ning before shipping. 

Before you start installation, disconnect the car battery at the

minus pole. We would urge you to have the installation work car-

ried out by a specialist as verification of correct installation and

connection of the unit is a prerequisite for warranty cover of the

HELIX amplifier. 

Install your amplifier at a dry location where there is sufficient air

circulation to ensure adequate cooling of the equipment. For

safety reasons, the amplifier must be secured in a professional

manner. This is performed by means of four fixing   screws scr-

ewed into a mounting surface offering sufficient retention and sta-

bility. 

Before drilling the holes for the screws, carefully examine the area

around the installation position and make sure that there are no

electrical cables or components, hydraulic brake lines or any part

of the petrol tank located behind the mounting surface - otherwi-

se these could be damaged. You should be aware of the fact that

such components may also be concealed in the double-skin trim

panels/mouldings. 

General instruction for connecting the amplifiers

The HELIX amplifiers may only be installed in motor vehicles

which have a 12-volt minus pole connected to the chassis ground.

Any other system could cause damage to the amplifier and the

electrical system of the vehicle. 

The plus cable from the battery for the complete system should be

provided with a main fuse at a distance of max. 

30 cm from the battery. The value of the fuse is calculated from the

maximum total current input of the car audio system.

Install the cabling in a manner which precludes any danger of the

leads being exposed to shear, crushing or rupture forces. If there are

sharp edges in the vicinity (e.g. holes in the bodywork) all cables

must be cushioned and protected to prevent fraying.

Never lay the power supply cables adjacent to leads and lines

connecting other vehicle equipment (fan motors, fire detection

modules, gas lines etc.).

In order to ensure safe installation, use only high-quality connections

and materials. Ask your dealer for high quality accessories.

ENGLISH

Due to the high quality standard Helix products achieved an excel-
lent international reputation.  Therefore we grant a warranty peri-
od of 2 years.
The products checked and tested carefully during the entire pro-
duction process. In the case of service note the following:

1) The 2 years warranty period commences with the purchase of

the product and is applicable only to the original owner. 

2)  During the warranty period we will rectify any defects

due to faulty material or workmanship by replacing or repai
ring the defective part at our decission. 
Further claims, and in particular those for price reduction, 
cancellation of sale, compensation for damages or subse
quential damages, are excluded. The warranty period is not 
altered by the fact that we have carried out warranty work.

3) Unauthorized tampering with the product will invalidate this 

warranty.

4)  Consult your authorized dealer first, if warranty service is nee-

ded. Should it be necessary to return the product to the fac-
tory, please insure that
a) the product is packed in original factory packing in

good condition

b) the warranty card has been filled out and attached to the

product

c) the product is shipped prepaid, i.e. at your expense

and risk

d) the receipt/invoice as proof of purchase is enclosed

5)  Excluded from the warranty are:

a) Shipping damages, either readily apparent or concea-

led (claims for such damages must be immediately 
notified to the forwarding agent).   

b) Scratches in metal parts, front panels or covers etc.

This must be notified to your dealer within 5 days of purchase.

c) Defects caused by incorrect installation or connec-

tion, by operation errors, by overloading or by external force.

d) Products which have been repaired incorrectly or

modified or where the product has been opened by
other persons than us.

e) Consoquential damages to other equipments.
f) Reimbursement when repairing damages by third

parties without our previous permission.

WARRANTY REGULATION

Reviews: