Heliospectra sensorHUB, Setup Manual, Page: 8 / 10

www.heliospectra.com
8
3.2 Sensor Connection
When connecting sensors, it is very important to fill in the sensor connection map below to en -
sure that the helioCORE user will know which sensor name in the software is referring to which
sensor in the grow facility.
Sensor input
port
Sensor serial
number
Sensor location
Sensor
calibration factor
helioCORE default
Display Name
S1 BC01M03AIO01
S2 BC01M03AIO02
S3 BC01M03AIO03
S4 BC01M03AIO04
S5 BC01M04AIO01
S6 BC01M04AIO02
S7 BC01M04AIO03
S8 BC01M04AIO04
If multiple sensorHUBs are connected to the helioCORE they will appear with in with Display
Names starting with “BC02” and “BC03” and so forth.
The sensor serial number is found on the label of the sensor head.
The sensor location refers to the physical placement of the sensor.
Example: “Greenhouse A Bay 1”
The sensor calibration factor is found in the Certificate of calibration for LI-COR sensors as the
‘Multiplier’-value under the caption “If this is an LI-190R-BL”.