Electrical pre-heater –
KWL-EVH 200/300 W
Installation and Operating Instructions
EN
EN
4
3. Remove the heat exchanger from the unit for better accessibility (see FigFig. 1).
4. Screw the electrical pre-heater to the provided bracket with the provided screw and lock washer (see FigFig. 2 and
5. Attach the electrical pre-heater connector to the pre-assembled unit connector (see FigFig. 4).
For proper installation of the connection cable, it must be secured to the side wall.
6. Stick the provided adhesive sockets to the side of the unit wall (see FigFig. 5)
7. Attach the electrical pre-heater connection cable to the side wall with the provided cable ties (see FigFig. 6).
The connection cable must not touch the heating element!
8. Re-insert the heat exchanger.
9. Re-insert the unit door and lock with the snap-in hooks.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Bracket for
electrical pre-heater
Unit connector
Connection cable
Adhesive socket