Helios AirPal-IVSS, Installation And Operating Instructions Manual, Page: 13 / 16

Tamper Protection Kit
AirPal-IVSS
Installation and Operating Instructions
5
EN EN
3. Pull out the locking mechanism on front side of the unit.
2.2.2 T-handle assembly
After disassembling existing locking mechanism, the T-handle is mounted as follows:
1. Disassemble the T-handle (Fig.11).
2. Take part 4 (the locking body) and insert it into the hole on the unit door. Part 4 must
be installed in a specific position (see Fig.12)!
Fig.10
Fig.11
Fig.12