Controller
AIR1-BE ECO
Operating instructions
22
EN
3.0 Installation
When using magnet strap connectors, the cable should be routed through the alternati-
ve outlet at the bottom of the wiring compartment. Open the cover for this purpose. Turn
the cover 180° and block the side outlet. Then re-mount the cover.
3.1 Controller overview
The system is operated via seven buttons.
3.2 LED functions
The LEDs have the following functions:
4.0 Connection/wiring diagram
The electrical connection is displayed in the installation and operating instructions for the
AIR1 unit.
CHAPTER 3
INSTALLATION
AND OPERATION
Fig.1
Fig.2
Display alarms
Left
Cancel
Confirm selection
Red LED
Yellow LED
Up
Down
Right
Symbol
Function
Colour
There are one or more unacknowledged alarm(s)
Red (flashing)
There are one or more remaining acknowledged
alarm(s)
Red (constant)
Dialogue box; Setting options after clicking OK
Yellow (flashing)
Modification mode
Yellow (constant)
CHAPTER 4
WIRING DIAGRAM
m
DANGER