1
Weather protection cover AIR1-AAD
Installation and Operating Instructions
EN
1.0
Important information
In order to ensure correct operation and for your own safety, please read and observe the following instructions ca-
refully before proceeding. Important information and necessary cleaning and maintenance activities are specified in
the maintenance section. The cleaning and maintenance work may only be carried out by qualified electricians. The
chapter “Installation and commissioning” with important installation information and basic unit settings is intended for
the specialist installer.
Keep the operating instructions close to the unit for easy reference. After the final assembly, the document must be
issued to the operator (tenant/owner).
1.1 Warning and safety instructions
The adjacent symbol is a safety-relevant prominent warning label. All safety regulations and/or symbols must
be absolutely adhered to, so that any dangerous situation is avoided.
1.2 Warranty claims – Exclusion of liability
If the preceding instructions are not observed, all warranty claims shall be excluded. This also applies for liability claims
against the manufacturer.
The use of accessories, which are not recommended or offered by Helios, is not permitted. Any possible damages are
not covered by the warranty.
1.3 Regulations – Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to all applicable regulations and EC
guidelines at its date of manufacture.
1.4 Receipt
Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
1.5 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging influences:
Protection by dry, air- dustproof packing (plastic bags with drying agent and moisture indicators). The storage place
must be waterproof, vibration-free and free of temperature variations. Damages due to improper transportation, sto-
rage or commissioning are verifiable and not liable for warranty.
1.6 Area of application – Intended use
If an AIR1 ventilation unit is installed outside, it is necessary to use a weather protection cover to protect against
weather conditions e.g. rain and snow. The weather protection cover AIR1-AAD increases the protection category
for AIR1 ventilation units for external installation. It is designed exclusively as an accessory for ventilation units in AIR1
series XH or RH.
Intended use also includes the observance of the operating instructions and the instructions of the ventilation unit
manufacturer as well as the inspection and maintenance intervals specified by HELIOS.
Any use other than the intended use is prohibited!
1.7 Dimensions
– Weather protection cover AIR1-AAD (XH 1000-3500)
CHAPTER 1
GENERAL INFORMATION
m
Type
A
B
C
D
E
F
G
Separable
AIR1-AAD XH 1000
2005
106
635
785
205
469
2107
–
AIR1-AAD XH 1500
2085
106
643
790
205
509
2187
–
AIR1-AAD XH 2500
2346
120
860
1000
230
639
2448
–
AIR1-AAD XH 3500
2970
134
970
1010
235
951
3072
x
850
A
G
E
1170
F
F
B
640
115
C
5°
D
Maße (mm)
Art.-Nr. Type
A
B
C
D
E
F
G
Teilbar
06305 AIR1-AAD XH 1000
2005 106 635 785 205 469 2107
-
06306 AIR1-AAD XH 1500
2085 106 643 790 205 509 2187
-
06315 AIR1-AAD XH 2500
2346 120 860 1000 230 639 2448
-
06316 AIR1-AAD XH 3500
2970 134 970 1010 235 951 3072
x
Fig.1
