Air purifier AirPal 1750/2200 H
Installation and Operating Instructions
EN
EN
8
3�4 Power supply connection
IEC 60320 C15 power cable (3 m long) is supplied with the unit package. Use the power cable to connect the power supply
(Fig.9).
4�1 Operation of rotary control
m
Danger to life due to electric shock!
An electric shock can result in death or serious injury.
The unit must be fully isolated from the mains power supply before all maintenance work and opening the terminal compart-
ment!
- Do not operate the unit without a proper electrical grounding/earthing.
- Make sure that the unit is connected to a power supply with a 30 mA individual RCD.
- Always disconnect the unit power supply before performing any service or maintenance work.
The fan is directly controlled by the speed controller (potentiometer).
Push the rotary control to power the unit. The blue LED light indicates that the unit is running (Fig.10).
Fig�9
CHAPTER 4
OPERATION
m
DANGER
Fig�10
Push the rotary control
