8
Preparing to Drive
1. Remove the body from vehicle.
2. Loosen the hook-and-loop battery straps.
3. Install the fully charged battery into the vehicle, be sure to secure the
battery straps to keep the battery in.
Note/Tip: If you are you using a tall high capacity battery, optional long straps are
available to suit your configuration.
4. Ensure the motor is plugged into the ESC.
5. Ensure the vehicle power switch is in the OFF position and connect the
battery to the ESC.
6. Read and understand the manual supplied with the Ikonnik ET4 radio
system.
CAUTION: NOTE TRANSMITTER CAUTIONS AND SETTING INSTRUCTIONS BEFORE
USE.
7. Install the [4] AA type alkaline batteries into the transmitter.
8. Confirm settings for steering/throttle trim and motor direction (update
connection if necessary)
9. Confirm ESC settings for the battery you will use (check LVC program
mode and ensure it is properly set to 5 if using a LiPo or 1 if you are
using a NiMH battery pack.)
10. Re-install body with 4 supplied clips; turn your equipment ON (transmitter
first!) and enjoy!
The IKONNIK ET4 Radio System
Your Select Four 10SC comes equipped with one of the most advanced
2.4GHz radios in its class. It is feature packed and incorporates technology
normally reserved for only the upper echelon of radio systems and some
completely unique to IKONNIK.
Familiarize yourself with the usage and features presented in the IKONNIK
ET4 Owner’s Manual and quick start guide to enhance your experience:
Most importantly we recommend you become familiar with the following
features of the system.
• Pairing the transmitter and receiver.
• Setting Steering and Throttle trims.
• Using the 10 Model memory
• Utilizing the Beginner Modes to share and enhance the fun.
• Configuring the ergonomics to fit you