Atomic Flash Instructions
4
Installing Li-Ion battery in the boat
Safety Warning
1. Turn the latch on the boat hatch to the
left or right and remove the hatch.
2. Place a fully charged Li-Ion battery in
the battery holder of the boat hull.
3. Connect the JST plug on the battery
to the JST plug from the ESC (electronic
speed controller).
4. Hold the boat cover hatch upside
down and ensure the silicon sealing ring
is correctly in place.
While continuing to hold the boat cover
hatch upside down, attach the hull as
per the diagram above in the following
order, 1 first, 2 second and 3 last. Press
the boat cover hatch firmly into place
and turn the latch to secure.
1. Safety feature - Boat will only operate when placed in water. But to prevent possibility of injury
from a spinning propeller do not even attempt to run the boat out of the water.
2. The boat should only be used when placed in water and controlled by the transmitter.
3. Adjust the rudder so that it is inline with the centreline of the boat so the boat will track in a
straight line.
4. This product is suitable for persons over 14 years of age unless under adult supervision.
5. Make sure there is no one swimming nearby so as to avoid injury.
6. Do not use in water containing foreign bodies which may damage the boat and prevent smooth
operation
7. The radio control will operate at distances up to 300ft/100m. Do not exceed this distance
otherwise you may loose control of the boat.
8. When you are not using the boat, disconnect the battery and turn off the transmitter.
9. When the Li-Ion battery in the boat is running out of power, the boat will slow down. Return the
boat to shore and recharge as soon as possible.
10. Always recharge the battery before storing it away to prevent damage to the battery.
11. Please be safety consious and keep the boat under control.
12. Do not enter the water to retreive the boat without safety protection, so as to avoid accidents.
