QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.com
PAIRING
1
Place your Four 10SC and ET4
transmitter in close proximity but
not less than 12” (300mm) apart.
2
Switch ON your ET4 transmitter.
Switch ON your Four 10SC. The
receiver’s LED will blink.
3
Switch OFF your ET4 transmitter,
hold down the REV/PAIR button
and switch ON the transmitter.
□ REV /
PAIR
button)
4
Press the Pair button on the
receiver. The LED will blink.
Release the Pair button.
□ Rx
button/
finger)
5
When the LED on the receiver
shows solid red your ET4 and Four
10SC will be paired. Return to
Step 9 of this guide to complete
the set-up of your Four 10SC.
□ Rx LED
NOTE: If you experience any problems,
please consult online troubleshooting guide.
Parts List:
HLNS0001 ..... Four 10SC
HLNS0178 ...... Quick-Start Guide
HLNS0179 ...... Full Manual
Having followed Steps 1 to 8, in the unlikely event that your car does not operate please
follow the 5 stage pairing process detailed here:
12” Apart
LED
Pair
Button
Pair
Button
Solid red
LED
