Maintenance and Service
Energy Manager 1.3 - Instruction Manual
63
8.1.3
How to Perform a Forced Restart
With the function
Forcedrestart
selected software processes are started
anew. The function is performed automatically after new units have been
implemented into the system. A system message informs you that a forced
restart has to be performed manually.
Proceed as follows:
1.
Login with service password. See
page 28.
2.
In the main menu, select
Service
.
3.
Confirm with
OK.
4.
Select
Forcedrestart
.
NOTICE! There is no security query. After confirming with
OK
, the
function will immediately be performed.
5.
Confirm with
OK
.
The Energy Manager is restarted without further query.
8.1.4
How to Apply the Reset Button
In case the LCD functions are not available, the mainboard reset button
(1) allows to:
Restart the system
Switch-off the system
A main board reset may only be executed by Heliocentris or an authorized
partner.
A mainboard reset does not reset error messages and does not reset the
system.
Small screw driver or a ball pen
The reset button (1) is behind a small opening in the control panel.
To restart the Energy Manger:
Press the reset button for a short time (> 2 seconds).
The mainboard is shut down and rebooted.
To switch-off the Energy Manger:
Press the rest button for about 5 seconds.
The Energy Manager is switched-off.
Restart
Switch-off
