Getting Started
28
Energy Manager 1.3 - Instruction Manual
With the control keys <left > and <right> you navigate the cursor in a
line and place the cursor to the character you wish to change.
With the control keys <up> and <down>you select a digit between 0
and 9.
Login
has been confirmed in the main menu and the LCD login is
displayed.
Figure 4-4 LCD login
The cursor is placed on the selected and active digit.
To enter another digit:
1.
Select the desired entry with <up> and <down> key.
2.
Place cursor to the next digit with <right> key.
3.
Continue until all letters and signs are entered.
4.
Confirm with
OK
.
A message informs if the login level has been changed to service.
5.
Press any key to leave the message.
6.
Press the <left > key several times or continuously, until the main
menu is displayed.
4.7
How to Login as Service User
A login with a proper password is necessary to perform service and
administration operations. Password and PIN are defined during the
configuration of the system.
TIP
For a login as user without particular rights, no password is required.
To login as service user, proceed as follows:
1.
In the main menu, select
Login
.
2.
Confirm with
OK
.
You are asked to enter your PIN code.
3.
on page 27.
4.
Confirm with
OK.
A message indicating your access level is displayed.
Upon successful conclusion of a service operating, a logoff is necessary to
protect the system against unauthorized access. The logoff is performed
automatically 5 minutes after the last keystroke took place.
Example
Automatic logoff
