4
Remove the Transition tail gearbox and
the Landing Skid ,than,installation the
2x12mm x4,
￠
2x5x0.5mm x4 Plastic
Spacer.
Glue the wood pieces together to form
two wood blocks.(Remarks: the hight of
the wood block is depend on what heli
you use.)
Insert the skid pipes into the front and
rear landing skids as illustration.
Put the Landing Gear wear the 8mm
Landing Skid Mount .
Fix the Landing gear to the body with
￠
2x14mmx4 Self-Tapping screws.
Fix the Wood Landing Gear Stair on the
Landing Gear with Landing M2x12mm x4
Self-Tapping Screw.
2
1
3
4
5
6
