4
1
2
3
4
5
6
Install two Retract systems to the back landing hole on
the fuselage using 8x Self-Lock Screw 2x8mm. (Drill 8
1.5mm holes before securing the Retract system.)
Install the other Retract system to the front landing
gear hole on the fuselage using 4x Self-Lock Screw
2x8mm. (Drill 4 1.5mm holes before securing the
Retract System.)
Twist Ball-linkages to the Linkage Rods.
Secure the Ball-Linkage to the Retract System using
M2x8mm Screw.
Install two Screw-Lock Pushrod Connectors on the
servo horn and insert the Linkage Rods into the Screw-
Lock Pushrod Connectors and secure it by Nut screw.
Secure the Ball-linkage to the front retract system
using a M2x8mm Screw.
Summary of Contents for 500 Scale Fuselage A109
Page 1: ...1 ...
Page 7: ...7 Secure the Horizontal Fins to the fuselage use epoxy ...
Page 8: ...8 End of Manual ...
