4
KIT CONTENTS
OPERATIONAL WARNINGS
1. Transmitter
2. Helicopter
1
2
CAUTION! A separate Battery Eliminator Circuit (BEC)
must be used if you decide to change the stock (Futaba
®
S3114) servos to some other type of analog or digital servos.
We highly recommend the Castle Creations CC BEC 10A
Switching Regulator (CSEM0005).
DANGER! Please allow a 10 minute cool down period after
each fl ight so the Electronic Speed Control (ESC) can cool
down. Failure to do so may cause loss of control due to the
ESC overheating and shutting down.
DANGER! Please inspect the wooden main rotor blades
before each fl ight for damage. If any damage is found or if
the blades have been crashed, please replace the blades
before fl ying the model again.
CAUTION! If the rotor head speed ever drops suddenly in
fl ight please land the model immediately and remove the
body. Inspect the battery temperature and ensure that it
has not exceeded 140°F and ensure that the ESC has not
overheated. The ESC does have a thermal protection built in
which will reduce the power output to safe levels when the
safe operating temperatures have been exceeded. If this has
occurred please allow the model 10 minutes to cool down.
WARNING! The ESC does have a soft cut function that will
reduce the power output to protect the fl ight battery. Toward
the end of a fl ight, if you notice a slight power reduction, land
the model immediately and re-charge the battery. The fl ight
time of the AXE 400 3D RTF can be as long as 10 minutes
but this will vary depending on your fl ying style.
CAUTION! After a crash you must inspect all plastic parts on
the helicopter for damage before fl ying the model again.
Summary of Contents for AXE 400 RTF
Page 17: ...17 ...
Page 20: ...Entire Contents Copyright 2009 HMXE0800 Manual 1 1 ...
